Everything you need to choose the right sizes for your smartwatch strap.
1
Step 1 — Choose your smartwatch
Which smartwatch do you have?
2
Step 2 — Choose your strap size
What is your wrist circumference?
cm
Size
Wrist circumference
Variant name
S
14.5 – 16 cm
14.5 - 16 cm (S)
M
16 – 17.5 cm
16 - 17.5 cm (M)
L
17.5 – 19 cm
17.5 - 19 cm (L)
💡 Between two sizes?Choose the smaller size for a snugger fit — ideal during sport or activity.
Choose the larger size for a looser fit — great for everyday wear.
Either size works perfectly — it's purely personal preference. Outside our sizes? We're happy to help with a custom size.
⚠️ Please note: After selecting your wrist size, you'll also need to choose your Watch case size in mm. That's covered in step 3, where you'll also find a handy guide to identifying your exact Watch model.
📏 Important: measure your wrist accurately
Measuring carefully lets us determine the right size for you. Every Samsung watch has a different case size, and we use your wrist circumference to calculate the exact fit — so your strap sits like it was made for you.
Measure to one decimal place — for example, 15.7 cm.
⚠️ Important: In step 3, carefully check both your case size and your connector width. Together these determine whether the strap fits.
cm
Size
Wrist circumference
Variant name
S
14.5 – 16 cm
14.5 - 16 cm (S)
L
16.5 – 18 cm
16.5 - 18 cm (L)
cm
Size
Wrist circumference
Connector width
S
14.5 – 16 cm
20 mm or 22 mm
L
16.5 – 18 cm
20 mm or 22 mm
How to measure your wrist
Measure your wrist where you'd normally wear your watch.
1
Using a tape measure
Wrap the tape measure around your wrist, just above the wrist bone. Not too tight, not too loose — you should be able to fit one finger between the tape and your skin.
2
No tape measure?
Wrap a charging cable or strip of paper around your wrist and mark where it meets. Lay it flat and measure with a ruler.
3
Step 3 — Choose your connector size
Which exact model and size do you have?
Look up your exact Apple Watch model to find out which case size variant to select.
⚠️ Series 10 & 11 exception: If you have the 42mm → choose 38 / 40 / 41 mm | If you have the 46mm → choose 42 / 44 / 45 / 46 / 49 mm
Which connector size do I need?
Double-check your Apple Watch case size before selecting your variant.
1
Back of your watch
Check the back of your Apple Watch to find the case size engraved there (e.g. 45mm).
2
Or via the Watch app
Open the Watch app on your iPhone → go to General → About → check Model details
3
Step 3 — Find your case size & model
How to find your case size
Try either method below to find your watch's case size (e.g. 44mm).
1
Back of your watch
Flip your watch over and look for the case size in mm printed on the back. If you only see a model number (e.g. SM-R940), follow the note below.
2
Or via the app
Open the Galaxy Wearable app → Watch settings → About watch. If it shows only the model name or number, follow the note below.
Only see a model number or name (e.g. SM-R940)? Search it on Google or Samsung's support site (samsung.com/support), or ask Samsung Support chat — they'll confirm your exact model and case size, which you can then match in the table below.
Will it fit your watch?
Our straps are made for the standard Quick Release fitting, so they fit many watches beyond Samsung, Apple and Fitbit — as long as your model uses the same fitting.
Standard Quick Release
Our straps use the standard Quick Release fitting (20 mm or 22 mm) — the same fitting Samsung uses.
Fits many other brands
Many watches from other brands use this same standard fitting, so our straps often fit them too.
Check your own model
Look up your exact watch model's fitting (Quick Release, and 20 or 22 mm) before ordering, so you can be sure it fits.
Not sure which connector your watch has? Just look it up on Google:
"Does the [brand + model name] have a quick release pin connector?"
For example: "Does the Fossil Gen 6 have a quick release pin connector?"
Does your watch have a Quick Release pin connector of 20 mm or 22 mm? Then our strap fits.
Important: always check your exact watch model and its case size before ordering. Together these determine whether your watch works with the Quick Release pin mechanism and which connector width it uses (20 mm or 22 mm). Choosing the correct connector for your watch is your responsibility.